Termination w.r.t. Q proof of TRS/AProVELiveness6.4.trs

Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.

↳ QTRS

  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.

Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

TOP2(x, free(y)) → TOP1(x, check(new(y)))
TOP2(x, free(y)) → CHECK(new(y))
TOP1(free(x), y) → CHECK(new(x))
TOP2(x, free(y)) → TOP1(new(x), check(y))
TOP2(x, free(y)) → TOP1(check(x), new(y))
TOP2(x, free(y)) → CHECK(x)
TOP2(x, free(y)) → TOP1(check(new(x)), y)
CHECK(free(x)) → CHECK(x)
CHECK(old(x)) → OLD(check(x))
TOP1(free(x), y) → CHECK(new(y))
TOP1(free(x), y) → CHECK(x)
TOP1(free(x), y) → NEW(x)
CHECK(new(x)) → CHECK(x)
TOP2(x, free(y)) → NEW(x)
TOP1(free(x), y) → TOP2(check(x), new(y))
TOP1(free(x), y) → TOP2(new(x), check(y))
TOP2(x, free(y)) → CHECK(new(x))
TOP1(free(x), y) → NEW(y)
TOP1(free(x), y) → CHECK(y)
TOP1(free(x), y) → TOP2(check(new(x)), y)
OLD(free(x)) → OLD(x)
CHECK(old(x)) → CHECK(x)
CHECK(new(x)) → NEW(check(x))
TOP2(x, free(y)) → NEW(y)
TOP2(x, free(y)) → CHECK(y)
TOP1(free(x), y) → TOP2(x, check(new(y)))
NEW(free(x)) → NEW(x)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

Q DP problem:
The TRS P consists of the following rules:

TOP2(x, free(y)) → TOP1(x, check(new(y)))
TOP2(x, free(y)) → CHECK(new(y))
TOP1(free(x), y) → CHECK(new(x))
TOP2(x, free(y)) → TOP1(new(x), check(y))
TOP2(x, free(y)) → TOP1(check(x), new(y))
TOP2(x, free(y)) → CHECK(x)
TOP2(x, free(y)) → TOP1(check(new(x)), y)
CHECK(free(x)) → CHECK(x)
CHECK(old(x)) → OLD(check(x))
TOP1(free(x), y) → CHECK(new(y))
TOP1(free(x), y) → CHECK(x)
TOP1(free(x), y) → NEW(x)
CHECK(new(x)) → CHECK(x)
TOP2(x, free(y)) → NEW(x)
TOP1(free(x), y) → TOP2(check(x), new(y))
TOP1(free(x), y) → TOP2(new(x), check(y))
TOP2(x, free(y)) → CHECK(new(x))
TOP1(free(x), y) → NEW(y)
TOP1(free(x), y) → CHECK(y)
TOP1(free(x), y) → TOP2(check(new(x)), y)
OLD(free(x)) → OLD(x)
CHECK(old(x)) → CHECK(x)
CHECK(new(x)) → NEW(check(x))
TOP2(x, free(y)) → NEW(y)
TOP2(x, free(y)) → CHECK(y)
TOP1(free(x), y) → TOP2(x, check(new(y)))
NEW(free(x)) → NEW(x)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We deleted some edges using various graph approximations

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

TOP2(x, free(y)) → TOP1(x, check(new(y)))
TOP2(x, free(y)) → CHECK(new(y))
TOP1(free(x), y) → CHECK(new(x))
TOP2(x, free(y)) → CHECK(x)
TOP2(x, free(y)) → TOP1(check(x), new(y))
TOP2(x, free(y)) → TOP1(new(x), check(y))
CHECK(free(x)) → CHECK(x)
TOP2(x, free(y)) → TOP1(check(new(x)), y)
TOP1(free(x), y) → CHECK(new(y))
CHECK(old(x)) → OLD(check(x))
TOP1(free(x), y) → CHECK(x)
CHECK(new(x)) → CHECK(x)
TOP1(free(x), y) → NEW(x)
TOP2(x, free(y)) → NEW(x)
TOP1(free(x), y) → TOP2(new(x), check(y))
TOP1(free(x), y) → TOP2(check(x), new(y))
TOP2(x, free(y)) → CHECK(new(x))
TOP1(free(x), y) → CHECK(y)
TOP1(free(x), y) → NEW(y)
TOP1(free(x), y) → TOP2(check(new(x)), y)
OLD(free(x)) → OLD(x)
CHECK(new(x)) → NEW(check(x))
CHECK(old(x)) → CHECK(x)
TOP2(x, free(y)) → NEW(y)
TOP2(x, free(y)) → CHECK(y)
TOP1(free(x), y) → TOP2(x, check(new(y)))
NEW(free(x)) → NEW(x)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 4 SCCs with 14 less nodes.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

OLD(free(x)) → OLD(x)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

OLD(free(x)) → OLD(x)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
OLD(x1) = OLD(x1)
free(x1) = free(x1)

Recursive path order with status [2].
Quasi-Precedence:

[OLD₁, free_1]

Status:

free₁: multiset
OLD₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

NEW(free(x)) → NEW(x)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

NEW(free(x)) → NEW(x)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
NEW(x1) = NEW(x1)
free(x1) = free(x1)

Recursive path order with status [2].
Quasi-Precedence:

[NEW₁, free_1]

Status:

free₁: multiset
NEW₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

CHECK(new(x)) → CHECK(x)
CHECK(old(x)) → CHECK(x)
CHECK(free(x)) → CHECK(x)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

CHECK(new(x)) → CHECK(x)

The remaining pairs can at least be oriented weakly.

CHECK(old(x)) → CHECK(x)
CHECK(free(x)) → CHECK(x)

Used ordering: Combined order from the following AFS and order.
CHECK(x1) = CHECK(x1)
new(x1) = new(x1)
old(x1) = x1
free(x1) = x1

Recursive path order with status [2].
Quasi-Precedence:

[CHECK₁, new_1]

Status:

new₁: multiset
CHECK₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

CHECK(old(x)) → CHECK(x)
CHECK(free(x)) → CHECK(x)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

CHECK(old(x)) → CHECK(x)

The remaining pairs can at least be oriented weakly.

CHECK(free(x)) → CHECK(x)

Used ordering: Combined order from the following AFS and order.
CHECK(x1) = CHECK(x1)
old(x1) = old(x1)
free(x1) = x1

Recursive path order with status [2].
Quasi-Precedence:

[CHECK₁, old_1]

Status:

old₁: multiset
CHECK₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

CHECK(free(x)) → CHECK(x)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

CHECK(free(x)) → CHECK(x)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
CHECK(x1) = CHECK(x1)
free(x1) = free(x1)

Recursive path order with status [2].
Quasi-Precedence:

[CHECK₁, free_1]

Status:

free₁: multiset
CHECK₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ PisEmptyProof

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

TOP2(x, free(y)) → TOP1(x, check(new(y)))
TOP1(free(x), y) → TOP2(check(new(x)), y)
TOP1(free(x), y) → TOP2(x, check(new(y)))
TOP1(free(x), y) → TOP2(check(x), new(y))
TOP1(free(x), y) → TOP2(new(x), check(y))
TOP2(x, free(y)) → TOP1(check(x), new(y))
TOP2(x, free(y)) → TOP1(new(x), check(y))
TOP2(x, free(y)) → TOP1(check(new(x)), y)

The TRS R consists of the following rules:

top1(free(x), y) → top2(check(new(x)), y)
top1(free(x), y) → top2(new(x), check(y))
top1(free(x), y) → top2(check(x), new(y))
top1(free(x), y) → top2(x, check(new(y)))
top2(x, free(y)) → top1(check(new(x)), y)
top2(x, free(y)) → top1(new(x), check(y))
top2(x, free(y)) → top1(check(x), new(y))
top2(x, free(y)) → top1(x, check(new(y)))
new(free(x)) → free(new(x))
old(free(x)) → free(old(x))
new(serve) → free(serve)
old(serve) → free(serve)
check(free(x)) → free(check(x))
check(new(x)) → new(check(x))
check(old(x)) → old(check(x))
check(old(x)) → old(x)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.